RenovationStartthe renovation reality check

What does a driveway & patio cost?

As a national mid-range guide: £2,700 to £4,800 for a typical 30 m2 project, including 20% VAT. Budget finishes start around £2,000, premium runs to £7,200, and London adds a quarter. Set your own size, finish and region below for an instant estimate, no email required.

Block-paved driveway being laid
1. What are you planning?
3. Finish level

Driveway & patio, mid-range, Midlands

£2,700 to £4,800

Including 20% VAT. An indication, not a quote: prices vary per trade and property.

Take it further

Prices include 20% VAT. New builds and some energy-saving works can qualify for 0% or reduced VAT; ask your installer.

Got quotes in already? Check if they are fair. Want to know when the money leaves? See the phase-by-phase plan.

What drives the price

  • Material: concrete and gravel anchor the budget end, porcelain and natural stone the top.
  • The sub-base: excavation and hardcore are invisible and non-negotiable.
  • Drainage: front gardens need permeable paving or drainage under planning rules.
  • Edges and steps: the details add more than the flat metres.

All figures come from the same validated 2026 price data as the calculator above (sources: Checkatrade, MyJobQuote and comparable national 2026 cost guides, checked August 2026; see how we price), so this page and your estimate can never disagree. Planning this in London? See the London guide, or compare every region in the regional overview. How to pay for it (remortgage, loan or savings) is its own guide: paying for a renovation. Planning an extension or loft? Check permitted development first.

Frequently asked questions

Does a new driveway need planning permission?

Usually not if the surface is permeable or drains to a lawn or border. Over five square metres of impermeable paving draining to the road does need permission; your installer should know, and the council confirms it in minutes.

Do these prices include VAT?

Yes, all ranges include 20% VAT. New builds and some energy-saving works can qualify for 0% or reduced VAT; ask your installer whether your project applies.

How much does the region matter?

A lot: London typically runs 20 to 35 percent above the national average (this site plans with +25%, the quarter mentioned above), and the North of England, Scotland and Northern Ireland sit 10 to 20 percent below. The calculator adjusts for your region automatically, and the regional overview shows every factor.

How accurate is this range?

It is a guide range from national 2026 cost guides, adjusted for finish level and region. Real quotes vary per trade, property and specification; treat it as a starting point, budget 10 to 15 percent contingency, and always get at least three itemised quotes.